Elämysten verkkokauppa

Elämysten verkkokauppa

Valikko

Soveltuvuus

Search
Close this search box.

Tuotehaku

Ostoskori

Side stand enlarger Low Chassis F650GS (2008-) F700GS lower version

27350-100

52,00

Tilaustuote

Kuvaus


F 650 GS (2008 – )
F 700 GS

We have been offering side stand enlargers for BMW motorcycles for many years and we offer model specific enlargers for nearly every
model since 1994. Our design is simple, easy to install and time tested. The side stand enlarger is made of machined anodized
aluminum and it features a serrated edge to provide a better grip when deploying the stand.

Considering the weight of the F 650 | 700 GS Twin, the original side stand plate at roughly 2”x 2” is on the small side to offer secure support, especially
when parking on loose ground or hot asphalt. Our side stand enlarger increases the surface area by approximately 50% and provides the needed
support and peace of mind. The part is precisely shaped so that there is no interference with any other part of the bike and it is also visually
unobtrusive.

The three clamping screws hold the enlarger firmly in place with no drilling or other modifications needed. Be sure to place a few drops of thread locking
fluid on the screws to avoid them backing out and the part falling off. We offer thread locking fluid under the Related Products tab.
The facts:
Safe support for the machine on all surfaces
Compensates for the leaning angle of the motorcycle
Surface area increased by more than 100%
8 mm thick Dural aluminium
Rustproof anodised black
Rust protection for the original stand plate
Cut-out for original foot lined with vibration-absorbing foam rubber
CNC machined
Easy to fit.

Lisätiedot

BMW Motorrad malli

F 650 GS (2008-), F 700 GS (-2016), F 700 GS (2017-)


F 650 GS (2008 – )
F 700 GS

We have been offering side stand enlargers for BMW motorcycles for many years and we offer model specific enlargers for nearly every
model since 1994. Our design is simple, easy to install and time tested. The side stand enlarger is made of machined anodized
aluminum and it features a serrated edge to provide a better grip when deploying the stand.

Considering the weight of the F 650 | 700 GS Twin, the original side stand plate at roughly 2”x 2” is on the small side to offer secure support, especially
when parking on loose ground or hot asphalt. Our side stand enlarger increases the surface area by approximately 50% and provides the needed
support and peace of mind. The part is precisely shaped so that there is no interference with any other part of the bike and it is also visually
unobtrusive.

The three clamping screws hold the enlarger firmly in place with no drilling or other modifications needed. Be sure to place a few drops of thread locking
fluid on the screws to avoid them backing out and the part falling off. We offer thread locking fluid under the Related Products tab.
The facts:
Safe support for the machine on all surfaces
Compensates for the leaning angle of the motorcycle
Surface area increased by more than 100%
8 mm thick Dural aluminium
Rustproof anodised black
Rust protection for the original stand plate
Cut-out for original foot lined with vibration-absorbing foam rubber
CNC machined
Easy to fit.

Toimitusaika

Suurin osa tuotteistamme löytyy suoraan omasta varastostamme jolloin tuotteen toimitusaika on n. 1-4 arkipäivää. Jos tuotetta ei satu olemaan omassa varastossamme sitä löytyy todennäköisesti toimittajamme varastosta, tällöin toimitusaika n. 3-5 arkipäivää.

Jos tuotteen toimitusaika on pidempi kuin 7 arkipäivää, olemme yhteydessä asiakkaaseen heti saatavuustiedon saatuamme.


30 päivän joustava palautus

Verkkokaupasta tilatuilla tuotteilla on 30 päivän vaihto- ja palautusoikeus. Voit tutustua saamaasi tuotteeseen 30 päivän ajan tuotteen vastaanottamisesta ja varmistua näin ostopäätöksestäsi. Tuotteen voi palauttaa, mikäli tuote on käyttämätön, myyntikelpoinen, vahingoittumaton ja alkuperäisessä pakkauksessaan.

Palautus hoituu kätevästi postin kautta ilman lisäkuluja. Vaihdamme tuotteen toiseen, tai palautamme tuotteesta maksamasi hinnan tilisiirtona tilillesi, joten muista ilmoittaa palautuksen mukana myös pankkisi ja tilinumerosi. Huomaa että emme palauta mahdollisia toimituskuluja.

Tuotteenvaihdot tehdään toimituskuluitta.

Tilaus- ja toimitusehdot »

Sinua saattaisi kiinnostaa myös nämä

Soveltuvuudet

Etsi tuote helposti soveltuvuushaullamme tai alkuperäisosat OEM-haulla. Lisäämme ja päivitämme jatkuvasti soveltuvuustietoja tuotteisiimme, jotta löytäisit oikean tuotteen helposti. Jos et kuitenkaan löydä hakemaasi varaosaa vielä soveltuvuushaulla, voit kokeilla hakea sitä normaalilla tuotehaulla.

Jos et löydä etsimääsi tuotetta voit kysyä saatavuutta myös sähköpostitse varaosat@emc24.fi tai puhelimella
08 534 6510