Elämysten verkkokauppa

Elämysten verkkokauppa

Valikko

Soveltuvuus

Search
Close this search box.

Tuotehaku

Ostoskori

Swingarm Pivot Cover classic design

28290-202

31,20

Tilaustuote

Kuvaus

The large cavities of the swing arm pivot are permanently and securely protected. This is hardly possible with the black original plastic covers, since they just about jump off after the first hard contact with the boot. The result: The holes get covered in dirt and the pivot corrodes. Our anodised aluminium covers not only cover the pivot in an elegant manner, they also provide a very secure closure. Tip: Many aftermarket covers are simply inserted and held in place the help of an O-ring, which almost guarantees it will fly off eventually. We rely on a special set screw that pushes an “O” – ring against the inner wall of the hole; although this is technically elaborate, it is the only sensible way of fitting the cover. CNC-turned, milled and anodised or polished “Dural” aluminium in two different designs. Easy to install: Position the cover, tighten the set screw and the cover is already seated securely

Tuotenumero: 28290-202

Lisätiedot

Paino 1 kg (kilogramma)
BMW Motorrad malli

R 1200 GS (-2007), R 1200 GS (2008 – 2009), R 1200 GS (2010 – 2012), R 1200 GS Adv. (- 2007), R 1200 GS Adv. (2008 – 2009), R 1200 GS Adv. (2010 – 2013), R 1200 R ( – 2010), R 1200 R (2011 – 2014), R 1200 S, R 1200 ST

28290-202. The large cavities of the swing arm pivot are permanently and securely protected. This is hardly possible with the black original plastic covers, since they just about jump off after the first hard contact with the boot. The result: The holes get covered in dirt and the pivot corrodes. Our anodised aluminium covers not only cover the pivot in an elegant manner, they also provide a very secure closure. Tip: Many aftermarket covers are simply inserted and held in place the help of an O-ring, which almost guarantees it will fly off eventually. We rely on a special set screw that pushes an “O” – ring against the inner wall of the hole; although this is technically elaborate, it is the only sensible way of fitting the cover. CNC-turned, milled and anodised or polished “Dural” aluminium in two different designs. Easy to install: Position the cover, tighten the set screw and the cover is already seated securely

Toimitusaika

Suurin osa tuotteistamme löytyy suoraan omasta varastostamme jolloin tuotteen toimitusaika on n. 1-4 arkipäivää. Jos tuotetta ei satu olemaan omassa varastossamme sitä löytyy todennäköisesti toimittajamme varastosta, tällöin toimitusaika n. 3-5 arkipäivää.

Jos tuotteen toimitusaika on pidempi kuin 7 arkipäivää, olemme yhteydessä asiakkaaseen heti saatavuustiedon saatuamme.


30 päivän joustava palautus

Verkkokaupasta tilatuilla tuotteilla on 30 päivän vaihto- ja palautusoikeus. Voit tutustua saamaasi tuotteeseen 30 päivän ajan tuotteen vastaanottamisesta ja varmistua näin ostopäätöksestäsi. Tuotteen voi palauttaa, mikäli tuote on käyttämätön, myyntikelpoinen, vahingoittumaton ja alkuperäisessä pakkauksessaan.

Palautus hoituu kätevästi postin kautta ilman lisäkuluja. Vaihdamme tuotteen toiseen, tai palautamme tuotteesta maksamasi hinnan tilisiirtona tilillesi, joten muista ilmoittaa palautuksen mukana myös pankkisi ja tilinumerosi. Huomaa että emme palauta mahdollisia toimituskuluja.

Tuotteenvaihdot tehdään toimituskuluitta.

Tilaus- ja toimitusehdot »

Sinua saattaisi kiinnostaa myös nämä

Soveltuvuudet

Etsi tuote helposti soveltuvuushaullamme tai alkuperäisosat OEM-haulla. Lisäämme ja päivitämme jatkuvasti soveltuvuustietoja tuotteisiimme, jotta löytäisit oikean tuotteen helposti. Jos et kuitenkaan löydä hakemaasi varaosaa vielä soveltuvuushaulla, voit kokeilla hakea sitä normaalilla tuotehaulla.

Jos et löydä etsimääsi tuotetta voit kysyä saatavuutta myös sähköpostitse varaosat@emc24.fi tai puhelimella
08 534 6510